Anti-Terrorism Barriers and Car Park Resurfacing

CENTRAL SCOTLAND, DUNFERMLINE & LIVINGSTON

PROJECT DURATION : 8 weeks
PROJECT VALUE : £475K

Project Details

Our client required secure entry for two of their main sites in Scotland. C&S was appointed as the lead contractor in the barrier installation, and the re-surfacing of vast areas of their office car parks (circa 15,000 m2). Overall, we provided the client with an installation and turn-key solution which matched their specification. The project was completed safely within timescale, and met their budget.

C&S carried out a wide scope of works including:

We procured and installed:

• 2 off Defender 941 crash rated barriers
• 3 off standard 403 automated barriers
• H&S secured alternative traffic management before installation
• All ground works and cast barrier bases
• All duct work (power/data cables being ran from source to barrier)
• Tarring works to make good the site on completion of M&E works

• We planed 40mm from the badly damaged existing car park surface
• Renewed with 10mm dense bitumen macadam enriched wearing course
• Car park layout was white lined to client specification

The Defender series 941 barriers are heavy-duty vandal resistant dual beam vehicle barriers. The barrier is used to control vehicular access in and out of high security-controlled areas. They can be either installed on the perimeter of a site or further within the site. Whilst they are primarily intended for outdoor use, they can be used indoors in buildings such as warehouses. Various beam lengths are available from 3 metres to a maximum of 6 metres clear opening. The series 403 barriers are used to control vehicular access in and out of a controlled area of a site.